Volvo XC60: Removing the headlight housing
1. Switch off the ignition by briefly pressing the START/STOP ENGINE button.
2. Remove the remote key from the ignition slot1.
3. (Upper illustration under "Headlight housing").
1 Withdraw the headlight housing's locking pins.
2 Pull the headlight housing straight out.
CAUTION When disconnecting the connector, pull on the connector itself and not on the wiring.
4. (Lower illustration under "Headlight housing").
1 Unplug the wiring connector by holding down the clip with your thumb.
2 Pull out the connector with the other hand.
5. Lift out the housing and place it on a soft surface to avoid scratching the lens.
6. Replace the defective bulb(s).
Headlight housing
The entire headlight housing must be lifted out
when replacing all front bulbs.
CAUTION
Never touch the glass of bulbs with your fingers.
Grease and oils from your fingers
vaporize in the he ...
Reinserting the headlight housing
When reinserting the housing, be sure that the
long locking pin (to the left in the illustration) is
securely in place in both of its retaining clamps.
1. Plug in the connector until it clicks ...
See also:
Random playback
Random playback is operated in the same
way a CD is played. Refer to “Random
playback”. Each time you press the
button for 0.5 second or longer
(type
C audio)/ button (the “RDM”
...
Tire inflation pressure
Check the pressure of the tires (including
the spare) often and always prior to long
distance trips. The recommended tire
pressure specifications are shown on the
Tire and Loading Information ...
Occupant safety using seat belts
Occupant safety using seat belts
1. Putting on a seat belt:
Draw the belt out smoothly, ensure that the
belt height, the seat and your position on
the seat, are correct.
WARNING:
Seatbelts a ...
