Volvo XC60: Removing the cover to access the bulbs - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: Removing the cover to access the bulbs

NOTE
Before starting to replace a bulb, see page 322.

1. Open the retaining clamps by pressing them to the sides.

2. Pull the cover straight out.

Reinstall the cover in the reverse order.

    Reinserting the headlight housing
    When reinserting the housing, be sure that the long locking pin (to the left in the illustration) is securely in place in both of its retaining clamps. 1. Plug in the connector until it clicks ...

    Low beam, Halogen
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Unplug the connector from the bulb. 4. Remove the bulb by pressing the h ...

    See also:

    How To Disengage The Automatic Locking Mode
    Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode. WARNING! • ...

    Compatible formats
    The media player can play a number of different types of files and disc formats, and is compatible with the formats listed in the following table. NOTE Dual format (double-sided discs) such as ...

    Cargo compartment enlargement
    Important safety notes WARNING Always lock the seat backrest in its upright position when the rear seat bench is occupied, or the extended cargo volume is not in use. Check for secure lockin ...