Mercedes-Benz GLK-Class: Removing a wheel - Changing a wheel and mounting the spare wheel - Flat tire - Breakdown assistance - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Removing a wheel

  • Unscrew the wheel bolts.

hub threads could otherwise be damaged when you screw them in. Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in.

  • Remove the wheel.
    Raising the vehicle
    WARNING When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle. The jack is designed exclusively for jacking up the vehicle at t ...

    Mounting a new wheel
    WARNING Always replace wheel bolts that are damaged or rusted. Never apply oil or grease to wheel bolts. Damaged wheel hub threads should be repaired immediately. Do not continue to drive und ...

    See also:

    Lap/Shoulder Belt
    The lap/shoulder belt goes over your shoulder, across your chest, and across your hips. To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckl ...

    Starting the engine
    1 Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side of the electronic key to the “ENGINE START STOP” switch. If any of the doors is opened and closed while the k ...

    Passenger’s frontal airbag ON and OFF indicators
    Refer to “Front passenger’s frontal airbag ON and OFF indicators”. ...