Jeep Liberty: Remote Keyless Entry (RKE)
This system allows you to lock or unlock the doors and liftgate, open the liftgate flip-up window, or activate the PANIC alarm from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter. The RKE transmitter does not need to be pointed at the vehicle to activate the system. However, the line of transmission must not be blocked with metal objects when using the RKE transmitter.
NOTE: Inserting the key into the ignition switch disables all buttons on the RKE transmitter.
Vehicle Key
- To Unlock The Doors And Liftgate
- To Lock The Doors And Liftgate
- To Unlatch The Liftgate Flipper Glass
- Using The Panic Alarm
- Programming Additional Transmitters
- Battery Replacement
- General Information
Illuminated Entry
The courtesy lights will turn on when you use the
Remote Keyless Entry (RKE) transmitter to unlock the
doors or open any door.
This feature also turns on the approach lighting in the
outside mi ...
To Unlock The Doors And Liftgate
Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver’s door or twice to
unlock all doors and the liftgate. The turn signal lights
will flash to acknowledge the ...
See also:
Automatic standby mode
Adaptive cruise control is linked to other systems
such as the stability and traction control
system (DSTC). If this system is not functioning
properly, adaptive cruise control is automatically ...
How to use brightness control and display ON/OFF
button
To change the display brightness, push the
button. Pushing the button again will change the
display to the day or the night display.
If no operation is performed within 5 seconds,
the display ...
Remote Control
To use the remote control, aim it at the transmitter window at either seatback
console and press the button. Direct sunlight or very bright light could affect
the ability of the RSE transmitter ...
