Subaru Forester: R (Reverse)
This position is for backing the vehicle.
To shift from the “N” to “R” position, stop the vehicle completely then move the lever to the “R” position.
When the ignition switch has been turned to the “LOCK” position, movement of the select lever from the “N” position to the “R” position is possible for a limited time period by depressing the brake pedal, and then it becomes impossible. For details, refer to “Shift lock function”.
P (Park)
This position is for parking the vehicle and
starting the engine.
In this position, the transmission is mechanically
locked to prevent the vehicle
from rolling freely.
When you park the vehicl ...
N (Neutral)
This position is for restarting a stalled
engine.
In this position the wheels and transmission
are not locked. In this position, the
transmission is neutral; the vehicle will roll
freely, eve ...
See also:
Removing a wheel
Unscrew the wheel bolts.
Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel
hub threads could otherwise be damaged when you screw them in.
Remove the wheel.
...
License plate lamps
Switch off the lights.
Open the tailgate.
Press lug 2 of license plate lamp 1 in the direction of the arrow and
remove license plate lamp lens 1.
Remove license plate lamp lens 1.
Repl ...
Active head restraints
When the occupant’s lower back
presses against the seatback
during a rear-end collision, the
head restraint moves slightly forward
and upward to help reduce
the risk of whiplash on the seat
...
