Jeep Liberty: Illuminated Entry - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Illuminated Entry

The courtesy lights will turn on when you use the Remote Keyless Entry (RKE) transmitter to unlock the doors or open any door.

This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “Mirrors” in “Understanding The Features Of Your Vehicle” for further information.

The lights will fade to off after approximately 30 seconds or they will immediately fade to off once the ignition switch is turned to ON/RUN from the OFF position.

NOTE:
• The front courtesy overhead console and door courtesy lights do not turn on if the dimmer control is in the Dome ON position (extreme top position).

• The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat” position (extreme bottom position).

    To Disarm The System
    Either press the UNLOCK button on the RKE transmitter or insert a valid Sentry Key into the ignition lock cylinder and turn the key to the ON/RUN position. NOTE: • Unlocking the doors with th ...

    Remote Keyless Entry (RKE)
    This system allows you to lock or unlock the doors and liftgate, open the liftgate flip-up window, or activate the PANIC alarm from distances up to approximately 66 ft (20 m) using a hand-held R ...

    See also:

    Four-Way Power Driver Seat
    A. Seat Position Handle B. Height Adjustment Control To adjust the seat: ○ Move the seat forward or rearward using the handle under the front of the seat cushion (A). See Seat Adjustment ...

    Electronic Brake Force Distribution (EBD) system
    The EBD system maximizes the effectiveness of the brakes by allowing the rear brakes to supply a greater proportion of the braking force. It functions by adjusting the distribution of braking ...

    Operating audio player or audio media
    Audio data from various audio devices or media can be played, depending on the equipment installed in the vehicle. Switch on the audio system or COMAND and select the audio device or medium ( ...