Mercedes-Benz GLK-Class: Preparing the vehicle
- Stop the vehicle as far away as possible from traffic on solid, non-slippery and level ground.
- Switch on the hazard warning lamps.
- Firmly depress the parking brake.
- Bring the front wheels into the straightahead position.
- Move the selector lever to P.
- Switch off the engine.
- Vehicles without KEYLESS-GO: remove the SmartKey from the ignition lock.
- Vehicles with KEYLESS-GO: open the driver's door. The on-board electronics have status 0, which is the same as the SmartKey having been removed.
- Vehicles with KEYLESS-GO: remove the Start/Stop button from the ignition lock ().
- All occupants must get out of the vehicle. Make sure that they are not endangered as they do so.
- Make sure that no one is near the danger area while a wheel is being changed. Anyone who is not directly assisting in the wheel change should, for example, stand behind the barrier.
- Get out of the vehicle. Pay attention to traffic conditions when doing so.
- Close the driver's door.
Flat tire
...
See also:
Topping up the engine oil
Your vehicle warranty may be
invalidated if damage is caused by
using oil that does not meet the
required specification.
Failure to use an oil that meets the
required specification could cause
...
Cooling System
To reduce potential for engine and transmission overheating,
take the following actions:
− City Driving
When stopped for short periods of time, shift the transmission
into NEUTRAL and incr ...
