Nissan Rogue: Precautions on cruise control
- If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the vehicle information display will then blink to warn the driver.
- If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically.
- If the SET indicator on the vehicle information display blinks, turn the cruise control main switch off and have the system checked by a NISSAN dealer.
- The SET indicator on the vehicle information display may blink when the cruise control main switch is turned ON while pushing the ACCEL/RES, COAST/SET or CANCEL switch. To properly set the cruise control system, perform the following procedures.
Do not use the cruise control when
driving under the following conditions:
- when it is not possible to keep the
vehicle at a set speed
- in heavy traffic or in traffic that
varies in speed
- on winding or hilly roads
- on slippery roads (rain, snow, ice,
etc.)
- in very windy areas
Doing so could cause a loss of vehicle
control and result in an accident.
Cruise control
...Cruise control operations
1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. MAIN (ONВ·OFF) switch The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your f ...See also:
Ceiling Light
The ceiling light has a three-position
switch: ON, Door Activated, and
OFF. In the Door Activated (center)
position, the light comes on when
you:
Open any door.
Unlock the doors and the ...
Washing the underbody
Chemicals, salts and gravel used for
deicing road surfaces are extremely corrosive,
accelerating the corrosion of underbody
components, such as the exhaust
system, fuel and brake lines, brake ...
Convertible seats
Securing a convertible seat with a seat
belt
Do not place the convertible seat in the front passenger's seat
NOTE
Refer to pages 47 and 48 for information
on securing a child restraint using ...