GMC Terrain: Power Liftgate Operation - Liftgate - Initial Drive Information - In Brief - GMC Terrain Owner's ManualGMC Terrain: Power Liftgate Operation

On vehicles with a power liftgate, the vehicle must be in P (Park) to use the

On vehicles with a power liftgate, the vehicle must be in P (Park) to use the power feature. The taillamps flash when the power liftgate moves.

Notice: If you open the liftgate without checking for overhead obstructions such as a garage door, you could damage the liftgate or the liftgate glass. Always check to make sure the area above and behind the liftgate is clear before opening it.

Choose the power liftgate mode by turning the dial on the switch to either the 3/4 or MAX position. Press8to open or close the liftgate.

    Manual Liftgate Operation
    Unlock the vehicle before opening the liftgate. Press the touch pad located in the handle of the liftgate, above the license plate, and lift up to open. Do not press the touch pad while closing the ...

    Windows
    Press the front of the switch to lower the window. Pull the switch up to raise it. Pushing or pulling the switch part of the way will open or close the window as long as the switch is operated. ...

    See also:

    Transmission fault
    In the event that the transmission develops a fault, a warning message may be displayed in the message centre and only limited gears may become available. You should seek qualified assistance imme ...

    Connecting a USB Flash Memory Device
    1. Open the upper glove box. 2. Push the release button to release the USB adapter cable. 3. Connect the USB flash memory device to the USB connector correctly and securely. When the ...

    Important safety notes
    The rear view camera is an optical parking aid. It shows the area behind your vehicle in the COMAND display. WARNING Make sure that no persons or animals are in the maneuvering range. Otherwi ...