Subaru Forester: Position light
1. Turn the bulb socket counterclockwise and pull out the socket.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Install the bulb socket by turning it clockwise.
High beam light bulbs
Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 2. Disconnect the electrical connector from the bulb. 3 ...Front turn signal light
It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. ...See also:
Lowering the vehicle
WARNING
Pump up the collapsible spare wheel before lowering the vehicle. You could otherwise
damage the wheel rim.
Place the ratchet wrench onto the hexagon nut of the jack so that the
...
Immobilizer
FCC WARNING
Changes or modifications not expressly
approved by the party responsible
for compliance could void
the user’s authority to operate the
equipment.
The immobilizer system is ...
FAV—storing a shortcut
The FAV button can be used to store frequently
used functions, making it possible to start the
stored function by simply pressing FAV. One
favorite (for example, Equalizer) can be programmed
...