Suzuki Grand Vitara: Pedals - Other Controls and Equipment - Suzuki Grand Vitara Owner's ManualSuzuki Grand Vitara: Pedals

Automatic transmission
Manual transmission

Clutch Pedal (1)
Automatic transmission

Clutch Pedal (1)

(For manual transmission). The clutch pedal is used to disengage the drive to the wheels when starting the engine, stopping or shifting the gearshift lever or transfer lever. Depressing the pedal disengages the clutch.

CAUTION: Do not drive with your foot resting on the clutch pedal. It could result in excessive clutch wear or clutch damage.

Brake Pedal (2)

Your SUZUKI vehicle is equipped with front disc brakes and rear drum brakes. Depressing the brake pedal applies both sets of brakes. You may hear occasional brake squeal when you apply the brakes. This is a normal condition caused by environmental factors such as cold, wet, snow, etc.

and occurs each time the brakes are applied, you should have the brakes checked WARNING: If brake squeal is excessive and occurs each time the brakes are applied, you should have the brakes checked by your SUZUKI dealer.

by applying them continuously or resting your foot on the pedal. This will result WARNING: Do not “ride” the brakes by applying them continuously or resting your foot on the pedal. This will result in overheating of the brakes which could cause unpredictable braking action, longer stopping distances or permanent brake damage.

Accelerator Pedal (3)

This pedal controls the speed of the engine. Depressing the accelerator pedal increases power output and speed.

    Parking Brake Lever
    Parking Brake Lever (1) To set (2) To release (3) To release The parking brake lever is located between the seats. To set the parking brake, hold the brake pedal down and pull the parking brake ...

    Gearshift Lever
    Manual transmission 5-speed automatic transmission Your vehicle is equipped with either a manual transmission or automatic transmission. The gearshift lever for each transmission type is shown ...

    See also:

    Ending a Call
    Press to end a call. ...

    Setting the temperature
    Different temperatures can be set for the driver's and front-passenger sides. Turn the SmartKey to position 2 in the ignition lock. To increase/reduce: turn controls 1 and 8 clockwise or cou ...

    Common functions: Remote key/Personal Car Communicator (PCC)
    Personal Car Communicator (PCC) ...