Volvo XC60: Park position (P)
Select the P position when starting or parking.
Shiftlock
When P has been selected, the transmission is mechanically blocked in this position. The brake pedal must be depressed and the ignition must be in at least mode II (see page 82) before the gear lever can be moved from the P position.
Always apply the parking brake when the vehicle is parked. Press the control to apply the brake, see page 122.
CAUTION The vehicle must be stationary when position P is selected.
Automatic transmission
Shiftgate positions Depress the button on the front of the gear selector knob to move the gear selector between the R, N, D, and P positions. The gear selector can be moved freely between th ...Reverse В®)
The vehicle must be stationary when position R is selected. ...See also:
Auto-reverse function (if so equipped)
There are some small distances immediately
before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., inside
the vehicle before closing the ...
Epb automatic use
EPB will be applied automatically if the ignition
is switched off and the vehicle speed is below
3km/h (2mph).
To prevent automatic operation, when the
vehicle is stationary, press and hold the EP ...
Engine number
The engine number is stamped on the engine
block as shown in the drawing. ...