GMC Terrain: Park Brake and P (Park) Mechanism Check
WARNING
When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move.
Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.
○ To check the parking brake's holding ability: With the engine running and the
transmission in N (Neutral), slowly remove foot pressure from the regular brake
pedal. Do this until the vehicle is held by the parking brake only.
○ To check the P (Park) mechanism's holding ability: With the engine running, shift
to P (Park). Then release the parking brake followed by the regular brake.
Contact your dealer if service is required.
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. ○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...Wiper Blade Replacement
Windshield wiper blades should be inspected for wear and cracking. See Maintenance Schedule on page 11‑3 for more information. Replacement blades come in different types and are removed in di ...See also:
Attaching child safety seats with tether s
Many forward-facing child safety seats include a tether strap which
extends from the back of the child safety seat and hooks to an anchoring
point called the top tether anchor. Tether straps are ava ...
Skidding
There are three types of skids that correspond to the vehicle's three control
systems:
○ Braking Skid — wheels are not rolling.
○ Steering or Cornering Skid — too much speed or ...
Safety Belt System
WARNING: Always drive and ride with your seatback upright
and the lap belt snug and low across the hips.
WARNING: To reduce the risk of injury, make sure children sit
where they can be properly r ...