Volvo XC60: Operation
Controls and display
1 Resume previous settings, increase speed (each additional press increases
speed by 1 mph (approximately 2 km/h).
2 Standby mode on/off
3 Set time interval
4 Put in active mode and set a speed
5 Set speed (parentheses indicate standby mode)
6 Time interval while it is being set
7 Time interval after it has been set
- Putting ACC in standby mode
- Setting a speed
- Changing the set speed
- Setting a time interval
- Standby mode (temporary deactivation)
- Standby mode due to action by the driver
- Automatic standby mode
- Queue Assist
- Turning ACC off completely
Steep inclines and/or heavy loads
ACC is primarily intended for use on fairly level roads. The system may have difficulty maintaining the correct distance to a vehicle ahead on steep inclines, if the vehicle is carrying a heav ...Putting ACC in standby mode
Before ACC can be used to regulate speed and/or the distance to a vehicle ahead, it must first be put in standby mode. To do so: Press . The symbol appears in the display and parentheses ( ...See also:
Making a luggage room
WARNING:
● When making a luggage area, never arrange the seats while the vehicle is being
driven or is on an incline. The seats could move unexpectedly or more than required
and cause a se ...
Type D audio set (if equipped)
Type D audio set (if equipped)
The audio set will operate only when the
ignition switch is in the “Acc” or “ON”
position.
- Power and audio controls: refer to page
- Radio operation: ...
Running the Vehicle While Parked
It is better not to park with the engine running. But if you ever have to, here
are some things to know.
WARNING
Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine
e ...