Volvo XC60: Operation - Active chassis (Four C) - Active chassis system–Four C - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Operation

Chassis settings
Chassis settings

Use the buttons in the center console to change setting. The setting in use when the engine is switched off is activated the next time the engine is started.

    Advanced
    In this mode, body sway in curves is minimal and steering response is very direct. Gear shifting is done at high rpm in each gear for dynamic and active driving. ...

    Speed-dependent steering force
    Steering force increases with the speed of the vehicle to give the driver enhanced sensitivity. At low speed the vehicle is easy to steer in order to facilitate parking, etc. Steering force can ...

    See also:

    Safety systems
    WARNING Driving with the brake warning lamp illuminated can result in an accident. Have your brake system checked immediately if the brake warning lamp stays on. Do not add brake fluid before che ...

    Wheel replacement
    When replacing wheels due, for example, to damage, make sure the replacement wheels match the specifications of the wheels that are fitted as standard equipment. Replacement wheels are availabl ...

    Wheel changing safety
    Before raising the vehicle or changing a wheel, ensure that you read and comply with the following warnings. Always find a safe place to stop, off the highway and away from traffic. Ensure tha ...