Mercedes-Benz GLK-Class: Operation
Depending on the date of manufacture of your vehicle, the or symbol for the automatic headlamp mode/daytime running lamps is located on the light switch.
Illustration: light switch with the symbol for the automatic headlamp mode/daytime running lamps
Left-hand standing lamps
Right-hand standing lamps
Parking lamps, license plate and instrument cluster lighting
Automatic headlamp mode/daytime running lamps
Low-beam/high-beam headlamps
Rear fog lamp
Front fog lamps
Illustration: light switch with the symbol for the automatic headlamp mode/daytime running lamps
Left-hand standing lamps
Right-hand standing lamps
Parking lamps, license plate and instrument cluster lighting
Automatic headlamp mode/daytime running lamps
Low-beam/high-beam headlamps
Rear fog lamp
Front fog lamps
The turn signals, high-beam headlamps and the high-beam flasher are operated using the combination switch ().
Switch off the parking lamps and standing lamps when you leave the vehicle. This prevents the battery from discharging.
The exterior lighting (except the parking/ standing lamps) switches off automatically if you:
- remove the SmartKey from the ignition lock
- open the driver's door with the SmartKey in position 0
If you hear a warning tone when you leave the vehicle, the lights may still be switched on.
Turn the light switch to or .
Light switch
...Low-beam headlamps
To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . The indicator lamp in the instrument cluster li ...See also:
Selection of manual mode
With the vehicle either moving or stationary,
move the select lever from the “D”
position to the manual gate then move it to
the “+” end or “−” end of the manual gate
to ...
When the brakes get wet
When driving in rain or after washing the
vehicle, the brakes may get wet. As a
result, brake stopping distance will be
longer. To dry the brakes, drive the vehicle
at a safe speed while light ...
How to Reset the Engine Oil Life System
Reset the system whenever the engine oil is changed so that the system can calculate
the next engine oil change. To reset the system:
1. Turn the ignition to ON/RUN, with the engine off.
2. Press ...