Subaru Forester: Operating the driver’s window (type B)
Operating the driver’s window (type B)
1) Open
2) Automatically open
3) Close
To open:
Push the switch down lightly and hold it.
The window will open as long as the switch is held.
This switch also has a one-touch auto down feature that allows the window to be opened fully without holding the switch.
Push the switch down until it clicks and release it, and the window will fully open.
To stop the window halfway, pull the switch up lightly.
To close:
Pull the switch up lightly and hold it. The window will close as long as the switch is held.
Operating the driver’s window (type A)
Operating the driver’s window (type A) 1) Automatically open/close 2) Open/close To open: Press the switch down lightly and hold it. The window will open as long as the switch is held. Th ...Anti-entrapment function (type A)
- Never attempt to test this function using fingers, hands or other parts of your body. - The anti-entrapment function may not operate properly if some object gets trapped just before t ...See also:
Center Table
On LX and EX models
To use the center table, pull up the
outside edge of the table until it
latches. To store it, pull the lever and
lower the table.
Sitting on or getting under the ta ...
Fuse panel description
Engine Compartment
NOTE:
Not all fuse panel descriptions in this manual may be applicable to your
vehicle. It is accurate at the time of printing. When you inspect the
fuse box on your vehi ...
When does BLIS function
The system functions when your vehicle is
moving at speeds above 6 mph (10 km/h).
When you pass another vehicle:
The system reacts when you pass another
vehicle at a speed of up to 6 mph (10 km/ ...