Mercedes-Benz GLK-Class: Opening and closing the side windows - Side windows - Opening/closing - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Opening and closing the side windows

  1. Front left
  2. Front right
  3. ear right
  4. ear left

The switches for all side windows are located on the driver's door. There is also a switch on each door for the corresponding side window. The switches on the driver's door take precedence.

for the side windows is activated (). The side windows cannot be operated from the rear when the override feature for the side windows is activated ().

  • Turn the SmartKey to position 1 or 2 in the ignition lock.
  • To open: press the corresponding switch.
  • To close: pull the corresponding switch.

closing process is started in the corresponding direction. You can stop automatic If you press the switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.

or remove the SmartKey. This function is available for up to five minutes or until You can continue to operate the side windows after you switch off the engine or remove the SmartKey. This function is available for up to five minutes or until the driver's or front-passenger door is opened.

    Important safety notes
    WARNING When opening or closing the door windows, make sure there is no danger of anyone being harmed by the opening/closing procedure. The door windows are equipped with the express operatio ...

    Convenience opening feature
    You can ventilate the vehicle before you start driving. To do this, the key is used to carry out the following functions simultaneously: unlock the vehicle open the side windows open the pan ...

    See also:

    Automatically folding down the rear seat’s outboard head restraints
    Automatically folding down the rear seat’s outboard head restraints 1. The ignition must be in mode I or II. 2. Press the button to lower the rear head restraints for improved visibility. NOT ...

    Programming rolling-code-protected garage door openers in the U.S.A.
    If your garage door opener has a rolling code feature, program the HomeLink® Wireless Control System for it by following steps 1 through 5 in “Garage door opener programming in the U.S.A.†...

    How to Add Coolant to the Coolant Surge Tank
    Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine to overheat and be severely damaged. If you have not found a problem yet, check t ...