Range Rover Evoque: Opening and closing the bonnet

Opening and closing the bonnet
Opening and closing the bonnet

Opening

1. Pull the bonnet release lever, located in the left-hand front footwell.

2. Lift the bonnet safety catch lever, located below the centre point of the bonnet, then raise the bonnet.

Closing

retained Do not drive with the bonnet retained by the safety catch alone.

3. Lower the bonnet until the safety catch engages. Using both hands, press the bonnet down until the catches click. Check that both catches are engaged by trying to lift the front edge of the bonnet.

READ NEXT:

 Poisonous fluids

Fluids used in motor vehicles are poisonous and should not be consumed or brought into contact with open wounds. For your own safety, always read and obey all instructions printed on labels and co

 Used engine oil

Prolonged contact with engine oil may cause serious skin disorders, including dermatitis and cancer of the skin. Always wash thoroughly after contact. It is illegal to pollute drains, water co

 Engine compartment overview

Engine compartment overview 2.0L petrol engine 1. Brake/clutch fluid reservoir caps (beneath covers): A. Left-hand drive vehicles. B. Right-hand drive vehicles. 2. Engine oil filler cap. 5. O

SEE MORE:

 Rear View Mirrors

Rear View Mirrors - Component Location NOTE: RHD (right-hand drive) installation shown, LHD (left-hand drive) installation similar. DDM (driver door module) Driver exterior mirror Exterior mirror switches Memory switches Interior mirror (automatic dimming version shown) PDM (passenger door

 Glass, Frames and Mechanisms - Component Location, System Operation and Component Description

Component Location COMPONENT LOCATION - DOOR MECHANISMS Passenger door glass motor Passenger door module Rear door glass motor Rear door module Rear fuse box Rear door glass motor Rear door module Driver door glass motor Driver door module CJB (central junction box) COMPONENT LOCATION -

© 2011-2024 Copyright www.rrevoque.org