Volvo XC60: On and off
To switch Collision Warning on or off, press MY
CAR on the center console control panel and
go to Settings
Car settings
Driver
support systems
Collision Warning. If
Collision Warning is on, the system will perform
a self-test each time the engine is started by
briefly illuminating the warning light. See page
134 for more information about the menu system.
When the engine is switched on, the Collision Warning setting that was being used when it was switched off will be the default setting.
Operation
Settings are made by pressing MY CAR on the
center console control panel and using the
menus displayed. ...
Activating/deactivating warning signals
The collision warning system’s visual signals
are activated automatically when the engine is
started if the collision warning system is
switched on.
The audible warning signal can be activate ...
See also:
Information about uniform tire quality grading
Tire Quality Grades apply to new
pneumatic passenger car tires. The
Quality grades can be found where
applicable on the tire sidewall
between tread shoulder and
maximum section width. For
exampl ...
Recommended grade and viscosity
Each oil manufacturer has its own base
oils and additives. Never use different
brands together. For details, refer to
“Manual transmission, front differential
and rear differential gear oilâ ...
Opening and closing the side outlets
1 Open the vent.
2 Close the vent.
■Using the automatic mode
Fan speed is adjusted automatically in accordance with the temperature
setting
and ambient conditions. In addition, the follo ...
