Subaru Forester: Odometer/Trip meter
Type A
1) Trip knob
Type B
1) Trip knob
This meter displays the odometer and two trip meters when the ignition switch is in the “ON” position.
If you press the trip knob when the ignition switch is in the “LOCK” or “Acc” position, the odometer/trip meter will light up. It is possible to switch the indications while the odometer/trip meter is lit up. If you do not press the trip knob within 10 seconds of illumination of the odometer/trip meter, the odometer/trip meter will turn off.
The display can be switched as shown in the following illustrations by pressing the trip knob.
Type A:
*: 
or 
,
and 
or 
cannot
be displayed when the ignition switch is
in the “ON” position.
Type B:
*:
or
cannot be displayed when
the ignition switch is in the “ON” position.
Speedometer
The speedometer shows the vehicle
speed. ...
Odometer
Type A
Type B
The odometer shows the total distance
that the vehicle has been driven. ...
See also:
Active stability control (ASC)*
The active stability control (ASC) takes overall control of the anti-lock brake
system, traction control function and stability control function to help maintain
the vehicle’s control and tracti ...
Hazard Warning Switch
Hazard Warning
Switch
Push in the hazard warning switch to activate the hazard warning lights. All
four turn signal lights and both turn signal indicators will flash simultaneously.
To turn of ...
Infotainment
Read the following pages to become familiar with the audio system's features.
WARNING
Taking your eyes off the road for extended periods could cause a crash resulting
in injury or death to you ...
