Mercedes-Benz GLK-Class: Mounting a new wheel
WARNING
Always replace wheel bolts that are damaged or rusted.
Never apply oil or grease to wheel bolts. Damaged wheel hub threads should be repaired immediately. Do not continue to drive under these circumstances! Contact an authorized Mercedes-Benz Center or call Roadside Assistance.
Incorrect wheel bolts or improperly tightened wheel bolts can cause the wheel to come off.
This could cause an accident. Make sure to use the correct wheel bolts.
WARNING
Only use genuine Mercedes-Benz wheel bolts. Other wheel bolts may come loose.
Do not tighten the wheel bolts when the vehicle is raised. Otherwise, the vehicle could fall off the jack.
- : Wheel bolts for all wheels supplied by the factory
- ; Wheel bolts for the collapsible spare wheel
Always use wheel bolts 2 to mount the collapsible spare wheel. Using other wheel bolts to mount the collapsible spare wheel could damage the brake system.
WARNING
Make sure to use the original length wheel bolts when remounting the original wheel after it has been repaired.
- Clean the wheel and wheel hub contact surfaces.
To prevent damage to the paintwork, hold the wheel securely against the wheel hub while screwing in the first wheel bolt.
- Place the emergency spare wheel on the wheel hub and push it on.
- Tighten the wheel bolts until they are finger-tight.
- Inflate the collapsible spare wheel ().
Removing a wheel
Unscrew the wheel bolts. Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in. Remove the wheel. ...Inflating the collapsible spare wheel
WARNING Inflate the collapsible spare wheel only after the wheel is properly attached. Inflate the collapsible spare wheel using the tire inflation compressor before lowering the vehicle. ...See also:
Transfer
You may not transfer the DATABASE to third
parties, except together with system for which
it was created, provided that you do not retain
any copy of the DATABASE, and provided that
the transferee ...
Digit dial
Once your phone is connected to the vehicle’s
system, Digit Dial is the default screen in
Phone mode.
Using the on-screen keypad, enter the required
number and touch the connect icon to send.
N ...
Daytime Running Lights — If Equipped
The headlights will turn on as Daytime Running Lights
(DRL) and operate at lower intensity whenever the
ignition is ON, the engine is running, the headlight
switch is off, the parking brake is r ...