Subaru Forester: Measuring and adjusting air pressure to achieve proper inflation - Recommended tire inflation pressure - Tire information - Consumer information and Reporting safety defects - Subaru Forester Owner's ManualSubaru Forester: Measuring and adjusting air pressure to achieve proper inflation

Check and, if necessary, adjust the pressure of each tire (including the spare) at least once a month and before any long journey. Check the tire pressures when the tires are cold. Use a pressure gauge to adjust the tire pressures to the specific values. Driving even a short distance warms up the tires and increases the tire pressures.

Also, the tire pressures are affected by the outside temperature. It is best to check tire pressure outdoors before driving the vehicle.

When a tire becomes warm, the air inside it expands, causing the tire pressure to increase. Be careful not to mistakenly release air from a warm tire to reduce its pressure.

    Adverse safety consequences of under-inflation
    Driving at high speeds with excessively low tire pressures can cause the tires to flex severely and to rapidly become hot. A sharp in- crease in temperature could cause tread separation, and ...

    Glossary of tire terminology
    - Accessory weight The combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power seats, radio, ...

    See also:

    Photosensors
    Photosensors The mirror has a photosensor attached on both the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you an ...

    Control panel buttons — color screen with navigation system (if so equipped)
    Control panel buttons — color screen with navigation system (if so equipped) 1. (brightness control) button 2. Display screen 3. MAP button* 4. NAV button* 5. TRAF button* 6. SETUP bu ...

    Windshield Washer Fluid
    Front and rear (if equipped) Check that there is washer fluid in the tank by looking at the washer fluid level gauge which is attached to the cap of the washer fluid tank. If the fluid level ...