Mercedes-Benz GLK-Class: MB Info call button - mbrace - Features - Stowing and features - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: MB Info call button

  • Press and hold MB Info call button 1 for more than two seconds. This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in MB Info call button 1 flashes while the connection is being established. The Connecting Call message appears in the multifunction display. The audio output is muted.

If a connection can be established, the Call Connected message appears in the multifunction display.

If a cellular phone network is available and there is sufficient GPS reception, the mbrace system transmits data to the Mercedes-Benz Customer Assistance Center, for example:

  • current location of the vehicle
  • vehicle identification number

During the call, you can change to the navigation menu by pressing the NAVI button The display of the audio system or COMAND shows that an mbrace call is active. During the call, you can change to the navigation menu by pressing the NAVI button on COMAND, for example. Voice output is not available.

A voice connection is established between the Mercedes-Benz Customer Assistance Center and the vehicle occupants. You can obtain information on how to operate your vehicle's systems, on the location of the nearest authorized Mercedes-Benz Center, and on further products and services offered by Mercedes-Benz USA.

Further details on the mbrace system can be found under http://www.mbusa.com28. Log in under "Owners Online".

Rthe indicator lamp in MB Info call button 1 is flashing continuously. The mbrace system failed to initiate an MB Info call if:

Rthe indicator lamp in MB Info call button 1 is flashing continuously.

Rno voice connection to the Mercedes- Benz Customer Assistance Center was established.

This may be because the corresponding mobile phone network is not available.

The Call Failed message appears in the multifunction display.

  • To end a call: press the button on the multifunction steering wheel. button on the multifunction steering wheel.

or

  • Press the corresponding button for ending a phone call on the audio system or on COMAND.
    Roadside Assistance button
    X Press and hold Roadside Assistance button 1 for more than two seconds. This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in Roadside Assistance button 1 ...

    Call priority
    When service calls are active, e.g. Roadside Assistance or MB Info calls, an emergency call can still be initiated. In this case, an emergency call will take priority and override all other active ...

    See also:

    Emissions Inspection And Maintenance Programs
    In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states that require ...

    Driving on sand
    WARNING Do not reduce the tire inflation pressure before driving through sand. However, if you do so, remember to correct the tire inflation pressure before continuing your trip. Driving wit ...

    How do states use OBD II for emission inspections?
    Many states connect a computer directly to a vehicle's OBD II system. The inspector can then read "faults." In some states, this type of inspection has replaced the tailpipe emission ...