Nissan Rogue: Map lights
Map lights
Push the light lens to turn the map light on or off.
The map light control switch has three positions:
ON 1 , DOOR 2 and OFF 3 .
The light 4 (if so equipped) will illuminate when the headlight switch is turned to the or position.
Interior lights
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. ...ON position
When the switch is in the ON position 1 , the map lights will illuminate. ...See also:
Power Liftgate 3/4 Mode
To program the liftgate opening height:
1. Turn the liftgate switch to either the MAX , or the 3/4 mode position and
power open the liftgate.
2. Stop the liftgate movement at the desired height by ...
Deactivating/activating ESP®
Observe the "Important safety notes" section ().
WARNING
ESP® should not be deactivated during normal driving other than in the circumstances
described below. Disabling the syst ...
Introduction
Two remote keys or optional Personal Car
Communicators (PCC) are provided with your
vehicle. They enable you to unlock the doors
and tailgate, and also function as ignition keys
to start the v ...