Volvo XC60: Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or .
Daytime running lights can be deactivated in the MY CAR menu system under Settings Car settings Light settings Daytime running lights.
However, please be aware that these lights may not be deactivated in Canada.
NOTE
• The use of daytime running lights is
mandatory in Canada.
• Continuous high beams cannot be activated
when the headlight switch is in
position . High beam flash
will
function in this position.
High/low beam headlights
Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high an ...Active Bending Lights (ABL)
Headlight pattern with the Active Bending Light function deactivated (left) and activated (right) When this function is activated, the headlight beams adjust laterally to help light up a curve ...See also:
If your vehicle must be towed
If your vehicle has to be towed, it should be done
by your Hyundai dealer or a commercial tow
truck service. This will help assure that your
vehicle is not damaged in towing. Also, professionals ...
Connecting a USB Flash Memory Device
1. Open the upper glove box.
2. Push the release button to release
the USB adapter cable.
3. Connect the USB flash memory
device to the USB connector
correctly and securely.
When the ...
Operating the HomeLink® Universal Transceiver
HomeLink Universal Transceiver (once programmed)
may now be used to activate the
garage door, etc. To operate, simply push the
appropriate programmed HomeLink® Universal
Transceiver button. T ...