Volvo XC60: Low beam, Halogen
1. Remove the headlight housing from the vehicle (see page 322).
2. Remove the cover over the bulbs (see page 323).
3. Unplug the connector from the bulb.
4. Remove the bulb by pressing the holder downward.
5. Press the new bulb into the socket until it snaps into place. It can only be secured in one position.
6. Put the cover back into position and reinstall the headlight housing.
Removing the cover to access the bulbs
NOTE Before starting to replace a bulb, see page 322. 1. Open the retaining clamps by pressing them to the sides. 2. Pull the cover straight out. Reinstall the cover in the reverse order. ...High beam, Halogen
1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Remove the bulb by turning it counterclockwise and pulling it straight ...See also:
Higher speed motoring
Pre-Trip Inspections
1. Tires:
Adjust the tire inflation pressures to specification.
Low tire inflation pressures will result in
overheating and possible failure of the tires.
Avoid using wor ...
Audio main operation
Head unit:
The auto loudness circuit enhances the low and
high frequency ranges automatically in both
radio reception and CD playback.
ON·OFF/Volume control:
Place the ignition switch in the A ...
Function
Park assist button
The system is activated automatically when the
vehicle is started. The indicator light in the button
in the center console illuminates when the
system is on.
• The front ...