Mercedes-Benz GLK-Class: Loading a trailer
- When loading the trailer, make sure that neither the permissible gross
weight of the trailer nor the gross vehicle weight are exceeded. The permissible
gross vehicle weight is indicated on the identification plate on the B-pillar
on the driver's side of the vehicle.
You can find the maximum permissible values on the type plates of your vehicle and the trailer. Always observe the lowest respective value when determining the maximum weight with which you can load the vehicle and the trailer. - The trailer drawbar load on the ball coupling must be added to the rear axle load to avoid exceeding the permissible gross axle weight. The permissible gross vehicle weight is indicated on the identification plate on the B-pillar on the driver's side of the vehicle.
Mercedes-Benz recommends loading the trailer so that the drawbar noseweight remains between 8% and 15% of the permissible gross trailer weight.
The weight of additional accessories, passengers, and cargo reduces the permissible trailer load and drawbar noseweight for your vehicle.
Weight specifications
The gross trailer weight is calculated by adding the weight of the trailer to the weight of the load and equipment on the trailer. Permissible gross weight: 3500 lbs (1588 kg). The permissible Tra ...Checking the vehicle and trailer weight
To check that the weights of the towing vehicle and the trailer comply with the maximum permissible values, have the vehicle/trailer combination (including the driver, passengers, and cargo w ...See also:
Activating/deactivating airrecirculation mode
You can deactivate the flow of fresh air if unpleasant odors are entering the
vehicle from outside. The air already inside the vehicle will then be recirculated.
WARNING
Fogged windows impair ...
Towing
The rear sensors are automatically disabled
when a trailer with an approved electrical
connector is connected.
Note: Trailers fitted with LED lights will not
disable the rear parking aids sensors. ...
If no steam is coming from the engine compartment
NOTE
For details about how to check the
coolant level or how to add coolant,
refer to “Engine coolant”.
1. Keep the engine running at idling
speed.
2. Open the hood to ventilate the engi ...