Volvo XC60: Limitations
In certain situations, the BLIS indicator light(s) may illuminate even when there are no other vehicles in the area monitored by the system.
NOTE
If the BLIS indicator lights illuminate occasionally
even when there are no other vehicles
in the blind area, this does not indicate
a fault in the system.
In the event of a fault, Blind spot syst.
Service required will be displayed.
The following are several examples of situations in which the BLIS indicator light(s) may illuminate even when there are no other vehicles in the area monitored by the system.
Light reflected from a wet road surface
The vehicle's own shadow against a large, light, smooth surface such as
barriers between lanes on a highway
Sunlight directly in the camera when the sun is low on the horizon
How BLIS functions in daylight and darkness
Daylight BLIS reacts to the shape of surrounding vehicles. The system is designed to help detect motor vehicles such as cars, trucks, buses, motorcycles, etc. Darkness BLIS reacts to the headl ...Cleaning the BLIS camera lenses
In order to function optimally, the BLIS camera lenses must be kept clean. They can be wiped clean with a soft cloth or wet sponge. CAUTION • Clean the lenses carefully to avoid scratching. ...See also:
Cruise control indicator light
Refer to “Cruise control indicator light”. ...
NISSAN Vehicle Immobilizer System
The NISSAN Vehicle Immobilizer System will not
allow the engine to start without the use of the
registered key.
If the engine fails to start using the registered
key, it may be due to interfere ...
Lights
Switching the daytime running lamps on/ off
This function is not available in Canada. If you have activated the Daytime Running
Lights: function and the light switch is in the c or à positio ...