Volvo XC60: License plate lighting - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: License plate lighting

1. Remove the screws with a screwdriver.

1. Remove the screws with a screwdriver.

2. Carefully detach the entire bulb housing and pull it out.

3. Replace the bulb.

4. Reinsert the entire bulb housing and tighten the screws.

    Brake lights and taillights
    The brake lights and taillights are replaced from inside the cargo area. NOTE Before starting to replace a bulb, see page 322. 1. Open the panel. 2. Remove the bulb holder by turning it coun ...

    Cargo area lighting
    NOTE Before starting to replace a bulb, see page 322. 1. Insert a screwdriver and gently turn so that the bulb housing comes loose. 2. Replace the bulb. 3. Check that the bulb illuminates an ...

    See also:

    Cleaning the seat belts
    Clean only with lukewarm water and a mild soap solution. ...

    Center Table
    On LX and EX models To use the center table, pull up the outside edge of the table until it latches. To store it, pull the lever and lower the table. Sitting on or getting under the ta ...

    Engine compartment
    2.0L Gasoline Engine 1. Power steering fluid reservoir 2. Engine oil filler cap 3. Brake fluid reservoir 4. Air cleaner 5. Fuse box 6. Negative battery terminal 7. Radiator cap 8. Positive batt ...