Subaru Forester: License plate light - Replacing bulbs - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: License plate light

1. Remove the mounting screws using a

1. Remove the mounting screws using a Phillips screwdriver.

2. Remove the cover and lens.

3. Pull the bulb out of the socket.

4. Install a new bulb.

5. Reinstall the lens and cover.

6. Tighten the mounting screws.

    Rear combination lights
    1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly. 2. Slide the rear combination light assembly rearward and remove it from ...

    Dome light, map light, cargo area light and door step light
    When the door is opened, the map light illuminates and becomes very hot. When replacing the map light bulb, close the door and be careful not to burn yourself. Dome light (type A) Do ...

    See also:

    Non-turbo models
    The engine is designed to operate using unleaded gasoline with an octane rating of 87 AKI (90 RON) or higher. ...

    Auto Unlock On Exit
    When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL position and the driver’s door is opened. To make your selection, press an ...

    MODE button
    Models without Hands-free system Models with Hands-free system The “MODE” button is used to select the desired audio mode. Each time it is pressed, the mode changes to the next one in ...