GMC Terrain: License Plate Lamp - Bulb Replacement - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: License Plate Lamp

To replace one of these bulbs:

1. Open the liftgate partway. See Liftgate on page 2‑9.

Passenger Side Shown, Driver Side Similar

Passenger Side Shown, Driver Side Similar

2. Push the left end of the lamp assembly toward the right.

3. Pull the lamp assembly down to remove it from the liftgate.

A. Bulb Socket

A. Bulb Socket
B. Bulb
C. Lamp Assembly

4. Turn the bulb socket (A) counterclockwise to remove it from the lamp assembly (C).

5. Pull the bulb (B) straight out of the bulb socket.

6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install into lamp assembly.

7. Turn the lamp assembly into the liftgate engaging the clip side first.

8. Push on the lamp side opposite the clip until the lamp assembly snaps into place.

    Back–Up Lamp
    Removal of the lamp assembly is not required to replace the back-up lamp bulb. To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the interior trim acces ...

    Replacement Bulbs
    For replacement bulbs not listed here, contact your dealer. ...

    See also:

    Replacing batteries in the remote key/PCC
    The battery/batteries in the remote key/PCC should be replaced if: • The information symbol lights up and a text appears in the information display. and/or • the vehicle's locks repeatedly ...

    Replacement Tires
    The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manufacturer strongly recommend ...

    Rearview Camera and Monitor
    On EX-L model with navigation system Whenever you shift to reverse (R) with the ignition switch in the ON (II) position, the rearview is shown on the navigation system screen. For the best p ...