Jeep Liberty: Key Ignition Park Interlock - Automatic Transmission - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Key Ignition Park Interlock

This vehicle is equipped with a Key Ignition Park Interlock which requires the shift lever to be placed in PARK before the ignition switch can be turned to the LOCK/ OFF position. The key can only be removed from the ignition when the ignition is in the LOCK/OFF position.

Once the key is removed, the shift lever is locked in PARK.

    Automatic Transmission
    CAUTION! Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of RE ...

    Brake/Transmission Shift Interlock System
    This vehicle is equipped with a Brake Transmission Shift Interlock (BTSI) that holds the shift lever in the PARK position unless the brakes are applied. To move the shift lever out of the PARK p ...

    See also:

    Activating/deactivating warning signals
    The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on. The audible warning signal can be activate ...

    Anti-Theft Feature
    Anti-Theft Feature (1) Power on/off knob (2) Track up button/Fast forward button (3) Preset buttons (1 to 6) The anti-theft feature is intended to discourage theft or the audio system by preven ...

    Air distribution
    The incoming air is distributed from a number of different vents in the passenger compartment. Air distribution is fully automatic in AUTO mode. If desired, air distribution can be controlled ...