Volvo XC60: Introduction
The Driver Alert System is designed to help a driver who may be becoming fatigued or who is inadvertently leaving the lane.
The Driver Alert System consists of two different functions that can be switched on together or separately.
• Driver Alert Control (DAC)
• Lane Departure Warning (LDW), see
page 183
When one or both of the functions has been switched on, it is in standby mode and is activated when the vehicle exceeds a speed of 40 mph (65 km/h).
The function deactivates if the vehicle's speed goes under 37 mph (60 km/h).
Both functions use a camera that is dependent on the road/lane being clearly marked by painted lines on each side.
WARNING
The Driver Alert System does not function in
all situations and is designed to be a supplementary
aid. It is not, however, intended
to replace the driver’s attention and judgement.
Driver Alert Control (DAC)– introduction
This function is intended to alert the driver if
his/her driving becomes erratic, such as if the
driver is distracted or fatigued.
NOTE
The camera has certain limitations, see
page 159.
A c ...
See also:
Spare tire
TEMPORARY SPARE TIRE
The following instructions for the temporary
spare tire should be observed:
1. Check inflation pressure as soon as
practical after installing the spare
tire, and adjust t ...
Towing with a wheel-lift type truck
From the front (2WD models)
Release the parking brake.
From the front (4WD models)
Use a towing dolly under the rear
wheels.
From the rear
Use a towing dolly under the
front wheels. ...
Seatbelt warning light and chime
Refer to “Seatbelt warning light and
chime”. ...
