Toyota RAV4: Installing towing eyelet
Remove the eyelet cover using a flathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body, as shown in the illustration.
Insert the towing eyelet into the hole and tighten partially by hand.
Tighten down the towing eyelet securely using a wheel nut wrench.
Emergency towing
If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet. This should only be attempted on hard surfaced r ...Towing with a sling-type truck
Do not tow with a sling-type truck to prevent body damage. ...See also:
Steering Wheel Controls
Some audio steering wheel controls can be adjusted at the steering wheel.
: Press to interact with the available
Bluetooth or OnStar systems.
: Press to silence the vehicle speakers
only. Pre ...
Children Too Large For Booster Seats
Children who are large enough to wear the shoulder belt
comfortably, and whose legs are long enough to bend
over the front of the seat when their back is against the
seat back, should use the la ...
Preparing your vehicle
When the battery is disconnected or a new battery is installed, the
automatic transmission must relearn its shift strategy. As a result, the
transmission may have firm and/or soft shifts. This opera ...