Toyota RAV4: Installing the tire
Remove any dirt or foreign matter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
2 Install the tire and loosely tighten each wheel nut by hand by approximately the same amount.
Replacing a steel wheel with a steel wheel
Tighten the nuts until the tapered portion comes into loose contact with the disc wheel seat.
Replacing an aluminum wheel with a steel wheel
Tighten the nuts until the tapered portion comes into loose contact with the disc wheel seat.
Replacing an aluminum wheel with an aluminum wheel
Turn the nut washers until they come into contact with the disc wheel.
3 Lower the vehicle.
Type A
Type B
Type C
Firmly tighten each nut two or
three times in the order shown in
the illustration.
Tightening torque:
76 ft•lbf (103 N•m, 10.5 kgf•m)
5 Reinstall the wheel ornament.
16-inch wheel
17-inch and 18-inch wheels
Replacing a flat tire
Chock the tires. 2 Remove the wheel ornament using the wheel nut wrench as shown below. 16-inch wheel To protect the wheel ornament, place a rag between the wrench and the wheel ornament, ...Stowing the flat tire
1 Remove any dirt or foreign matter from the disc wheel seat and the wheel contact surface. Vehicles with aluminum wheels and a steel wheel for the spare: Remove the plastic rings from the wh ...See also:
Auto-brake
If a collision is imminent and the driver has not
applied the brakes or begun to steer around the
vehicle or pedestrian, the auto-brake function
is activated without the driver pressing the
br ...
Sun visors
1 Forward position:
Flip down.
2 Side position:
Flip down, unhook, and
swing to the side.
3 Side extender:
Place in side position then
slide backwards. ...
Checking Oil Level
To assure proper engine lubrication, the engine oil must
be maintained at the correct level. Check the oil level at
regular intervals, such as every fuel stop. The best time to
check the engine ...