Subaru Forester: Installing child restraint systems with A/ELR
seatbelt
- Child restraint systems and seatbelts can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check the child restraint system before you place a child in it.
- Do not leave an unsecured child restraint system in your vehicle.
Unsecured child restraint systems can be thrown around inside of the vehicle in a sudden stop, turn or accident; they can strike and injure vehicle occupants as well as result in serious injuries or death to the child.
When you install a child restraint system, follow the manufacturer’s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased.
Choosing a child restraint system
Choose a child restraint system that is
appropriate for the child’s age and size
(weight and height) in order to provide the
child with proper protection. The child
restraint system should ...
Installing a rearward facing child restraint
1. Place the child restraint system in the
rear seating position.
2. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
ma ...
See also:
Bluetooth Communication Link
Mobile phones have been found to lose connection to the
Uconnectâ„¢ Phone. When this happens, the connection
can generally be reestablished by switching the phone
off/on. Your mobile phone is re ...
Ignition switch
Illuminated ignition switch (if equipped) Whenever a door is opened, the ignition
switch will be illuminated for your convenience, provided the ignition switch is
not in the ON position. The lig ...
Summer and winter tires
The arrows shows the direction of rotation of the tire
• When switching between summer and
winter tires, mark the tires to indicate
where they were mounted on the car, e.g.,
LF = left front ...
