Nissan Rogue: Installing child restraint LATCH lower anchor
attachments
LATCH webbing-mounted attachment
LATCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to anchors located at certain seating positions in your vehicle. With this system, you do not have to use a vehicle seat belt to secure the child restraint. Check your child restraint for a label stating that it is compatible with LATCH. This information may also be in the instructions provided by the child restraint manufacturer.
LATCH rigid attachment
When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint.
LATCH lower anchor location
LATCH lower anchor location
The LATCH anchors are located at the rear of
the seat cushion near the seatback. A label is
attached to the seatback to help you locate the
LATCH anchors. ...
Top tether anchor point locations
Top tether anchor point locations
Anchor points are located on the floor behind
the outboard and center seating positions.
The child restraint top tether strap must be used
when installing chi ...
See also:
Active Bending Lights (ABL)
Headlight pattern with the Active Bending Light function deactivated (left)
and activated (right)
When this function is activated, the headlight
beams adjust laterally to help light up a curve ...
If the cruise control indicator light flashes
Press the “ON-OFF” button once to deactivate the system, and then press
the button again to reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels
imm ...
Cautions on the handling of 4-wheel drive vehicles
Tyres and wheels
Since the driving torque can be applied to the 4 wheels, the driving performance
of the vehicle when operating in 4-wheel drive is greatly affected by the condition
of the tyres. ...
