Nissan Rogue: How to see each view - Around viewTM monitor (if equipped) - Center display, heater, air conditioner, audio, phone 
and voice recognition systems - Nissan Rogue Owner's ManualNissan Rogue: How to see each view

- The distance guide line and the

- The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a paved, level surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects.

- Use the displayed lines and the birdeye view as a reference. The lines and the bird-eye view are greatly affected by the number of occupants, fuel level, vehicle position, road condition and road grade.

- If the tires are replaced with different sized tires, the predictive course line and the bird-eye view may be displayed incorrectly.

- When driving the vehicle up a hill, objects viewed in the monitor are further than they appear. When driving the vehicle down a hill, objects viewed in the monitor are closer than they appear. Use the mirrors or actually look to properly judge distances to other objects.

The vehicle width and predictive course lines are wider than the actual width and course.

Front view
Front view

Rear view
Rear view

Operations after activation
- When the rear view is displayed on the left side on the screen (B or C ), the view on the right side switches between the bird’seye view B and the front-side view C each time the CAMERA bu ...

Front and rear view
Guiding lines, which indicate the vehicle width and distances to objects with reference to the vehicle body line A , are displayed on the monitor. Distance guide lines: Indicate distances from ...

See also:

OFF button
OFF button The automatic climate control system turns off (the air conditioner compressor and fan turn off) when the “OFF” button is pressed. When the “OFF” button is pressed, the ...

Trip information
Without Display Audio system Push the “DISP” button to display trip information. Display items can be switched by pressing the “DISP” button. With Display Audio system Push the “DI ...

Rolling code device equipment programming
Note: The assistance of a second person, may make the following steps quicker and easier. Once the button has been pressed there are only 30 seconds in which to complete Step 3. 1. At the garage d ...