GMC Terrain: How to Inspect the Engine Air Cleaner/Filter
To inspect the air cleaner/filter, remove the filter from the vehicle and lightly shake the filter to release loose dust and dirt. If the filter remains covered with dirt, a new filter is required. Never use compressed air to clean the filter.
To inspect or replace the engine air cleaner/filter:
1. Open the hood. See Hood on page 10‑5.
2. Locate the air filter housing on the passenger side of the engine compartment. See Engine Compartment Overview on page 10‑6.
3. Remove the four air cleaner housing cover screws.
4. Pull straight up on the cover, and while holding the cover, remove the air cleaner filter.
5. Inspect or replace the air cleaner filter.
When to Inspect the Engine Air Cleaner/Filter
Inspect or replace the air cleaner/ filter at the scheduled maintenance intervals.
See Maintenance Schedule on page 11‑3 for more information. If driving in dusty/dirty
conditions, inspect t ...
How to Reinstall Engine Air Cleaner/Filter
1. Install the air cleaner filter into the air cleaner housing. The outer air
cleaner filter seal must be fitted properly in the air cleaner housing.
2. Align the air cleaner housing cover tabs to ...
See also:
Driver’s SRS frontal airbag
The driver’s SRS frontal airbag uses a
dual stage inflator. The inflator operates in
different ways depending on the severity
of impact.
Have the system inspected by your
SUBARU dealer imme ...
Commandshiftâ„¢
To return to Sport mode after CommandShift
has been selected, move the selector back to D
then back to Sport mode. Transmission
Commandshift Selected will appear in the
message centre when the tra ...
Cargo area cover
To use
1. Draw out the cover retracted by spring and insert it in the mounting grooves
(A).
2. Remove the cover from the mounting grooves, and the cover will be rolled back
into the retracted ...
