Nissan Rogue: How to adjust the screen (if so equipped)
To set up the RearView Monitor to your preferred settings, push the SETTING button while the RearView Monitor screen is displayed.
Each time the SETTING button is pushed, the next setting item is selected. Turn the TUNEВ·SCROLL control knob to adjust each item.
Available setting items:
- Brightness
- Contrast
- Tint
- Color
- Black Level
The setting items will disappear and the display will return to the original screen if SETTING button is pushed when the last setting item is selected or if the screen is left without operation for some time.
Backing up on a steep downhill
Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown further than the actual distance. For example, the ...Operating tips
- When the selector lever is shifted to the R (Reverse) position, the monitor screen automatically changes to the RearView Monitor mode. However, the radio can be heard. - It may take some time ...See also:
Removing and Replacing the Floor Mat
The driver side floor mat is held in place by two retainers.
1. Pull up on the rear of the floor mat to unlock each retainer and remove.
2. Reinstall by lining up the floor mat retainer openings o ...
License plate light
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the lens and cover.
6. Tighte ...
Replacing
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push and hold the release tab A , and
move the wiper blade down the wiper arm
1 .
3. Insert the n ...