Nissan Rogue: Hood
- Make sure the hood is completely closed and latched before driving.
Failure to do so could cause the hood to fly open and result in an accident.
- If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.
When opening the hood:
1. Pull the hood release handle 1 located
below the instrument panel; the hood will
then spring up slightly.
2. Pull the lever 2 up at the front of the hood with your fingertips.
3. Raise the hood.
4. Remove the support rod from the hood and insert it into the slot 3 .
Hold the coated part A when removing or resetting the support rod. Avoid direct contact with the metal parts, as they may be hot immediately after the engine has been stopped.
When closing the hood:
1. Return the support rod to its original
position.
2. Slowly move the hood down to latch the lock.
3. Push the hood down to lock the hood securely into place.
Setting hazard indicator and horn mode
This vehicle is set in hazard indicator and horn
mode when you first receive the vehicle.
In hazard indicator and horn mode, when the
LOCK button 1 is pushed, the
hazard
indicator flashes tw ...
Lift gate
- Always be sure the lift gate has
been closed securely to prevent it
from opening while driving.
- Do not drive with the lift gate open.
This could allow dangerous exhaust
gases to be dra ...
See also:
Scan
The function automatically searches the current
waveband for radio stations. When a station
is found, it is played for several seconds
before scanning is resumed. While the station
is playing ...
Dashboard fuse box
Do not use a pointed object such as a screwdriver to open the
cover in the dashboard. You could damage the dashboard or the cover.
To open: pull out cover 1 slightly at the bottom in the
...
Activating/deactivating
The evaporator is ventilated when the airconditioning system is operated. The
blower is activated automatically approximately one hour after the vehicle has been
locked. The blower operates on ...
