Range Rover Evoque: Hill descent control (green)
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e.g. vehicle speed is too high) or
HDC fade-out is occurring.
READ NEXT:
Cruise control active (green)
Illuminates when cruise control is
active.
Side lamps (green)
Illuminates when the side lights are
switched on.
Front fog lamps (green)
Illuminates when the front fog
lamps are switched on.
SEE MORE:
Special Tool(s)
303-1390A
CKP Sensor Alignment Tool
JLR-303-1595
Alignment Tool, Crankshaft Damper
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Wheel and Tire
Tyre information label location.
Tyre pressures should be
checked
regularly using an accurate pressure
gauge, when the tyres are cold.
The following procedure should be used to
check and adjust the tyres pressures.
1. Remove the valve cap.
2. Firmly attach a tyre pressure gauge/inflator
© 2011-2024 Copyright www.rrevoque.org