Volvo XC60: High/low beam headlights
Continuous high beams
1. Set the ignition to mode II.
2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high and low beams (this also applies on models equipped with the optional Active Bending Lights).
> The symbol illuminates in the instrument panel to indicate that the high beams are on.
High beam flash
Move the lever toward the steering wheel to position 1. The high beams come on until the lever is released. ...Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or . Daytime running lights can be deactivated in the ...See also:
Wiper blades
The windshield wiper blades are different
lengths. The blade on the driver’s side is longer
than the one on the passenger side.
Service position
Wiper blades in service position
The wiper b ...
Data stored in the vehicle
Information about electronic data acquisition in the vehicle
(Including notice pursuant to California Code § 9951)
Your vehicle records electronic data. If your vehicle is equipped with mbrace1,
...
Loading a trailer
When loading the trailer, make sure that neither the permissible gross
weight of the trailer nor the gross vehicle weight are exceeded. The permissible
gross vehicle weight is indicated on th ...