Subaru Forester: High/low beam change (dimmer) - Light control switch - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: High/low beam change (dimmer)

High/low beam change (dimmer)
High/low beam change (dimmer)

To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “combination” on the combination meter is also on.

To switch back to low beam, pull the lever back to the detent position.

    Headlights
    Headlights To turn on the headlights, turn the knob on the end of the turn signal lever. first position Instrument panel illumination, tail lights, front side marker lights and license ...

    Headlight flasher
    Headlight flasher To flash the headlights, pull the lever toward you and then release it. The high beam will remain on for as long as you hold the lever. The headlight flasher works even ...

    See also:

    Important information
    WARNING When the climate control system is deactivated, the outside air supply and circulation are also deactivated. Only choose this setting for a short time. Otherwise the windows could fo ...

    Towing Assistance
    If you need towing assistance: • Press the button to begin. • After the “Ready” prompt and the following beep, say “Towing Assistance”. NOTE: • The towing assistance number dia ...

    Parking aids
    The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking ...