Subaru Forester: Headlights (models without HID headlights)
Halogen headlight bulbs become very hot while in use. If you touch the bulb surface with bare hands or greasy gloves, fingerprints or grease on the bulb surface will develop into hot spots, causing the bulb to break. If there are finger prints or grease on the bulb surface, wipe them away with a soft cloth moistened with alcohol.
NOTE
- If headlight aiming is required, consult
your SUBARU dealer for proper
adjustment of the headlight aim.
- It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary.
Headlights (models with HID headlights)
High-intensity-discharge (HID) bulbs are used for the low beams of the headlights. These HID bulbs use an extremely high voltage. To avoid the risk of an electric shock that could result ...Low beam light bulbs
Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). Left-hand side 2. Use a screwdriver to remove the secured ...See also:
Corrosion protection
Your SUBARU has been designed and
built to resist corrosion. Special materials
and protective finishes have been used on
most parts of the vehicle to help maintain
fine appearance, strength, a ...
Other voice control settings found in MY CAR
• Voice user setting: Two user profiles can
be set by pressing MY CAR and going to
Settings
Voice settings
Voice user
setting. Select User 1 or User 2.
• Voice output volume: Press ...
Jump Starting Instructions
WARNING:
• Never attempt to jump start your vehicle if the battery appears to be frozen.
Batteries in this condition may explode or rupture if jump starting is attempted.
• When making jum ...