Subaru Forester: Headlights (models with HID headlights) - Replacing bulbs - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Headlights (models with HID headlights)

High-intensity-discharge (HID) bulbs

High-intensity-discharge (HID) bulbs are used for the low beams of the headlights. These HID bulbs use an extremely high voltage. To avoid the risk of an electric shock that could result in serious injury, observe the following precautions.

- Do not replace any headlight bulbs (both low beam and high beam) by yourself.

- Do not remove/restore the headlight assemblies by yourself.

- Do not remove any headlightassembly components by yourself.

For replacement, contact your SUBARU dealer.

    Replacing bulbs
    Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury. Re ...

    Headlights (models without HID headlights)
    Halogen headlight bulbs become very hot while in use. If you touch the bulb surface with bare hands or greasy gloves, fingerprints or grease on the bulb surface will develop into hot spo ...

    See also:

    Onboard diagnostic system — OBD II
    Your vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. ...

    Viewing range on the screen
    Range of view Range of view Image from camera The area from the rear end of the bumper can be viewed. Areas at both ends of the bumper and areas just under the bumper cannot be vi ...

    Additives in gasoline
    One of the main problems of poor fuel quality is the forming of deposits that are caused during the gasoline combustion process. Mercedes-Benz recommends that you use fuel brands that have the add ...