Nissan Rogue: Getting the spare tire and tools
1. Open the lift gate.
2. Remove the cargo cover (if so equipped).
(See “Cargo cover” in the “2. Instruments and controls” section.) 3. Lift up the luggage floor board 1 (foldable or separate type).
4. Remove the lids of the luggage side boxes.
5. Remove the luggage floor box (Type A or B) by turning the clips counterclockwise.
Jacking tools
6. Remove the jacking tools and the spare tire.
Jacking tools: Remove the jack by turning it, then remove the other tools.
Spare tire
Type A:
Rotate the clamp until it can be removed then remove the spare tire.
Type B:
Rotate the clamp until it can be removed then relocate the subwoofer to a side of the cargo area and remove the spare tire.
Blocking wheels
Place suitable blocks 1 at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. Be sure to block the wheel as th ...Removing wheel cover (if so equipped)
Never use your hands to remove the wheel cover. This may cause personal injury. To remove the wheel cover, use the jack rod 1 as illustrated. Apply cloth 2 between the wheel and jack rod ...See also:
Setting and storing the parking position
You can position the front-passenger side exterior mirror in such a way that
you can see the rear wheel on that side as soon as you engage reverse gear. You
can store this position.
Make sur ...
Examples of the types of accidents in which the SRS curtain airbag is
unlikely to deploy.
1) The vehicle is involved in an oblique
side-on impact.
2) The vehicle is involved in a side-on
impact in an area outside the vicinity of
the passenger compartment.
3) The vehicle is involv ...
Finish Care
Application of aftermarket clearcoat sealant/wax materials is not recommended.
If painted surfaces are damaged, see your dealer to have the damage assessed and
repaired. Foreign materials such as ...