Jeep Liberty: General Cleaning
Careful vacuuming of the top before washing is helpful in removing dust and other foreign particles.
If Hand Washing:
• Wash in partial shade instead of direct sun.
• Wet the entire vehicle before washing the top.
• Wash the top with a soft, natural bristle scrub brush, and a mild soap solution such as liquid dish washing soap. Do not use detergent.
• Scrub in all directions, covering an area of about two square feet at a time. Avoid heavy scrubbing.
• Rinse the entire vehicle with water to remove all soap and dirt from the top fabric and to prevent streaking on painted and chrome surfaces.
• Allow the top to dry before opening. Vacuuming the top with a wet/dry shop vacuum will decrease the tops drying time, ensure removal of all dirt, and delete streaks in the material.
• Multiple cleanings may be necessary to remove stubborn stains. If stains persist, contact your local authorized dealership for further suggestions.
CAUTION!
Never use an abrasive type cleaner or bleaches.
Cleaners should not contain silicones, organic solvents, petroleum distillates, or plasticizers. Always wait until the top is thoroughly dry before opening it.
Washing
Hand washing or an automatic car wash with a soft cloth system is preferred. CAUTION! Avoid pointing a high-pressure hand held spray wand directly at the sides of the top, as this can damage ...Additional Cleaning Procedure
For additional cleaning assistance in removing stubborn stains, apply MOPAR Convertible Cloth Top Cleaner or equivalent to the complete stain, extending 2 in (50 mm) beyond the stain. With a sof ...See also:
Auto-brake
If a collision is imminent and the driver has not
applied the brakes or begun to steer around the
vehicle or pedestrian, the auto-brake function
is activated without the driver pressing the
br ...
Portable media connections
Portable media devices can be connected to
the media hub located in the cubby box. The
portable devices that you can connect to the
system include:
- USB mass storage devices (e.g. a memory
stick ...
To use as full-automatic climate control system
1. Place the temperature control dial in
the position for the preferred temperature.
2. Set the airflow control dial and fan
speed control dial in the “AUTO” position.
The system’s functio ...