Mitsubishi Outlander: Fusible links
The fusible links will melt to prevent a fire if a large current attempts to flow through certain electrical systems. In case of a melted fuse link, we recommend you to have your vehicle inspected. For the fusible links, please refer to “Fuse load capacity” on page 8-29.
WARNING:
● Fusible links must not be replaced by any other device. Failing to fit the correct
fusible link may result in fire in the vehicle, property destruction and serious
or fatal injuries at any time.
For cold and snow weather
Ventilation slots The ventilation slots in front of the windscreen should be brushed clear after heavy snowfall so that the operation of the heating and ventilation systems will not be impaired. ...Fuses
Fuse block location To prevent damage to the electrical system due to shortcircuiting or overloading, each individual circuit is provided with a fuse. There are fuse blocks in the passenger compa ...See also:
Protecting Discs
When a disc is not being played,
store it in its case to protect it from
dust and other contamination. To
prevent warpage, keep discs out of
direct sunlight and extreme heat.
To clean a disc, ...
Cleaning the sensors
When washing the vehicle do
not aim
high pressure water jets directly at the
sensors. Do not use abrasive materials
or hard/sharp objects to clean the
sensors. Only use approved vehicle
shampo ...
Rear window and outside mirror defroster switch
To defog/defrost the rear window glass and
outside mirrors (if so equipped), start the engine
and push the switch on. The indicator light 1
will illuminate. Push the switch again to turn the
...